IMX678-MIPI-CAM · MIPI CSI-2 Camera Module
An 8.3 MP Sony IMX678 camera module on a 22-pin MIPI CSI-2 interface — plug it into Raspberry Pi 4/5 or NVIDIA Jetson Orin Nano and capture UHD with native driver support. No adapters, no FPGA bridges, just the sensor done right.
Features
Everything you need to go from box to first frame in minutes.
SENSOR
The IMX678 is a 1/1.8'' 8.3 MP stacked CMOS sensor with back-illuminated pixels — high sensitivity in low light and wide dynamic range for machine vision.
RESOLUTION
3840 × 2160 at up to 30 fps full resolution, with binning and crop modes for higher frame rates at lower resolutions.
INTERFACE
Up to 2 Gbps per lane over a 22-pin ribbon connector — the native camera interface of Raspberry Pi and Jetson, no USB bottlenecks.
JETSON
Device-tree overlay and driver package for JetPack on Jetson Orin Nano / NX — recognized as a native CSI camera in the Argus pipeline.
RASPBERRY PI
On Raspberry Pi 4/5 the module enumerates as a standard libcamera device — rpicam-apps, GStreamer and Python all work out of the box.
OPTICS
Standard M12 lens mount with a matched low-distortion lens in the box; swappable for your FoV, IR-filter options available.
CABLE
Both Raspberry Pi 15-pin and Jetson 22-pin FFC cables included, so one SKU covers both ecosystems.
POWER
Powered directly from the CSI connector — no extra supply, no regulators on your desk.
SDK
GStreamer pipelines, libcamera examples and a getting-started guide for both platforms, in the repo and printed in the box.
Specifications
IMX678-MIPI-CAM — current production module.
| Sensor | Sony IMX678 · 1/1.8'' stacked BSI CMOS · STARVIS 2 · 8.3 MP effective |
|---|---|
| Resolution | 3840 × 2160 (4K UHD) · up to 30 fps at full width · ROI crop and binning modes for higher frame rates |
| Output format | RAW (Bayer 10/12-bit) · via ISP on host (libcamera / Argus) |
| Interface | MIPI CSI-2, 4-lane · up to 2 Gbps per lane · 22-pin FFC on module |
| Host support | Raspberry Pi 4 / 5 (libcamera) · NVIDIA Jetson Orin Nano / NX (JetPack, Argus) · 15-pin and 22-pin cables included |
| Lens mount | M12 (S-mount) · matched low-distortion lens included · IR-cut filter standard |
| Supply | 3.3 V via CSI connector · on-module regulators · no external power |
| Board size | 24 × 25 mm PCB · 4 mounting holes · 25 mm hole spacing compatible with Pi camera stands |
| Environment | 0–60 °C operating · RoHS |
| In the box | Camera module · M12 lens · 15-pin FFC · 22-pin FFC · quick-start card |
Payment received — thank you! Order confirmation is on its way to your email.
Secure checkout via PayPal — card accepted, no PayPal account needed.
Applications
From a desk prototype to a production line.
Request a quote
Tell us about your project — lens FoV, host platform, target volume.